skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Replacing gasket ring for right flange shaft (Fabia II, Roomster)|Install > < Replacing gasket ring for right flange shaft (Fabia II, Roomster)

Fabia Mk2

Removing
Removing
  Note
t  Observe the general repair instructions → Chapter.
t  Do not remove both flange shafts simultaneously from the gearbox. If the differential bevel gears twist in the differential gear, it will be difficult to reinstall the fixing screw for the flange shaft.
–  Remove the sound dampening system → Body Work; Rep. gr.50.
–  Remove drive shaft from flange shaft → Chassis; Rep. gr.40.
   
–  Tie up the drive shaft as far as possible. Avoid damaging the paintwork on the drive shaft during this operation.
–  Position the catch pan under the gearbox.
  N37-10433
–  Unscrew screw for flange shaft with socket insert -T10107A- or commercially available socket insert 6 mm.
–  Take out the flange shaft.
–  Remove the gasket ring of the flange shaft e.g with extractor tool -T20143- or tyre iron.
  N34-11389

Replacing gasket ring for right flange shaft (Fabia II, Roomster)|Install > < Replacing gasket ring for right flange shaft (Fabia II, Roomster)