| Removing and installing cylinder head |
Note | t
| Always replace cylinder head bolts. |
| t
| Always replace self-locking nuts. |
| t
| Hose connections and hoses for charge air system must be free of oil and grease before being installed. |
| t
| When installing an exchange cylinder head with the camshafts installed, it is necessary to oil the contact surfaces between bucket tappets and cams. |
| t
| Do not remove the plastic covers supplied as a protection for the open valves until just before fitting on the cylinder head. |
| t
| If the cylinder head is replaced, the system must be completely filled with fresh coolant. |
| Removing and installing timing belt → Chapter. |
|
|
|
