Octavia Mk1
| Summary of components |
| 1 - | Cap |
| q | Replace seal if damaged |
| 2 - | 10 Nm |
| 3 - | Cylinder head cover |
| q | for removing the cap remove: |
| t | Vacuum reservoir |
| t | Ignition coils |
| t | Wiring loom |
| t | Crankcase ventilation hose |
| t | Top toothed belt guard |
| 4 - | Gasket for cylinder head cover |
| q | replace if damaged |
| q | before fitting, coat contact faces of bearing cover and camshaft adjuster on cylinder head surface with sealant -D 454 300 A2 - → Chapter. |
| 5 - | Oil deflector |
| q | check fitting position: |
| above inlet camshaft |
| 6 - | Cylinder head |
| q | check for distortion → Chapter |
| q | permissible reworking dimension → Chapter |
| q | removing and installing → Chapter |
| q | after replacing fill entire system with fresh coolant |
| 7 - | Intake manifold gasket |
| q | replace |
| 8 - | Cylinder head gasket |
| q | replace |
| q | metal gasket |
| q | check fitting position: |
| the side with the marking of the part number must point towards the cylinder head |
| 9 - | Exhaust manifold gasket |
| q | replace |
| q | Check fitting position |
| 10 - | Cylinder head bolt |
| q | replace |
| q | pay attention to specified order and procedure when slackening and tightening → Chapter |
