Skoda Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Reworking valve seats >
< Replacing valve stem seals
Octavia Mk1
Drive unit
1.8 ltr./132 kW Engine - Mechanical Components
Engine cylinder head, valve gear
Valves, valve stem seals, valve guides, valve seats
Inspect valve guides
Inspect valve guides
Inspect valve guides
Special tools and workshop equipment required
t
Universal dial gauge holder -MP3-447 (VW 387)-
t
Dial gauge
–
Insert valve into guide. End of valve stem must be flush with guide.
–
Determine valve rock.
Wear limit
Inlet valve guide
Outlet valve guide
0.80 mm
0.80 mm
Note
t
If the wear limit is exceeded, repeat measurement with new valves. If the wear limit is again exceeded, replace cylinder head.
t
If the valve is replaced when carrying out repair work, use a new valve for the measurement.
Drive unit
1.8 ltr./132 kW Engine - Mechanical Components
Engine cylinder head, valve gear
Valves, valve stem seals, valve guides, valve seats
Inspect valve guides
Reworking valve seats >
< Replacing valve stem seals