skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the front sealing flange|Install > < Removing and installing the front sealing flange

Octavia Mk1

Removing
Removing
–  Remove the V-ribbed belt and clamping fixture → Chapter.
–  Removing timing belt → Chapter.
   
–  Remove crankshaft toothed belt sprocket. Lock timing belt sprocket with counterholder -T30004- or counterholder - MP1-310-.
  Note
When screwing on the counterholder place 2 washers between the timing belt gear and the counterholder.
–  Drain engine oil.
–  Removing the oil pan → Chapter.
–  Unscrew front sealing flange.
–  Remove sealing flange, if necessary release by applying slight blows with a rubber-headed hammer.
–  Clean sealing surfaces, they must be free of oil and grease.
  S13-0166

Removing and installing the front sealing flange|Install > < Removing and installing the front sealing flange