skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing gasket ring for camshaft|Install > < Removing and installing gasket ring for camshaft

Octavia Mk1

Removing
Removing
–  Removing timing belt → Chapter.
–  Remove camshaft sprocket and hub → Chapter.
–  Turn inner part of gasket ring extractor -T30003- two turns (approx. 3 mm) out of the outer part and lock with knurled screw.
   
–  Oil the thread head of the gasket ring extractor, position and forcely screw into the gasket ring as far as possible.
–  Slacken knurled screw and turn inner part of gasket ring extractor against the camshaft until the gasket ring is pulled out.
  S15-0169

Removing and installing gasket ring for camshaft|Install > < Removing and installing gasket ring for camshaft