| Removing and installing cylinder head |
| Special tools and workshop equipment required |
| t
| Lifting device -MP9-200 (10-222A)- |
| t
| Catch pan, e.g. -VAS 6208- |
| t
| Pliers for spring strap clamps |
| t
| Hand vacuum pump, e.g. -VAS 6213- |
| t
| Sealant remover gasket stripper (bearing code GST, bearing article no. R 34402), manufacturer Retech GmbH |
| t
| Protective goggles and gloves. |
| l
| Ignition is switched off and ignition key is withdrawn. |
|
|
|
