skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Erasing fault memory > < Actuator diagnosis

Octavia Mk1

Initiating basic setting
Initiating basic setting
The basic setting is only undertaken on the master; address word 29.
Conditions
l  The vehicle after mechanical installation of the components (after lowering it from the lift platform or straightening bench)
l  Note the zero positions (vehicle without driver, unloaded)
l  Ignition on
l  The low beam is switched on
   
Readout on display:
–  Enter function 04. Confirm the entry with the key Q.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Enter 001. Confirm the entry with the key Q.
  
Basic setting        Q
Enter display group number XXX
Readout on display:
–  Adjust the headlight mechanically → .
–  -> Press key.
  
System in basic setting        1 ->
Setting the headlight beam
Readout on display:
–  Enter function 04. Confirm the entry with the key Q.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Enter 002. Confirm the entry with key Q.
  
Basic setting        Q
Enter display group number XXX
Readout on display:
–  -> Press key.
  
System in basic setting        2 ->
The regulated position has been learned
Readout on display:
  
Vehicle system test               HELP
Select function XX

Erasing fault memory > < Actuator diagnosis