skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the slide valve body > < Removing and installing oil pan

Octavia Mk1

Removing and installing ATF strainer
Removing and installing ATF strainer
Removing
–  Removing the oil pan → Chapter.
   
–  Remove ATF strainer from slide valve body.
Install
  N38-0027
–  Push the gasket -1- onto the intake collar -arrow- of the ATF strainer by hand
–  Insert the intake collar of the ATF strainer approximately 3 mm into the slide valve body (not up to the stop). When installing the oil pan, the AFT strainer is pressed into the correct installation position.
–  Installing the oil pan → Anchor.
–  Top up ATF after repair → Chapter.
  N38-0189

Removing and installing the slide valve body > < Removing and installing oil pan