| Special tools and workshop equipment required |
| t
| Universal measuring device -VW 385- |
| t
| Pressure plate -MP3-407 (VW 402)- |
| t
| Pressure spindle -MP3-408 (VW 412)- |
| t
| Pipe section -MP3-414 (VW 516)- |
| t
| Universal dial gauge holder -MP3-447 (VW 387)- |
| t
| Thrust piece -MP3 458 (VW 472/1)- |
| t
| Assembly device -MP6-414 (3253)- |
| t
| Assembly stand -MP9-101- |
| t
| Gearbox mount -T30097 (T10108)- |
| t
| Stop plate -T30097/1 (T10108/1)- |
| t
| Digital depth gauge, e.g. -VAS 6087- |
| t
| Feeler gauges with 0.03 mm graduation |
| t
| Torque gauge 0...600 Ncm |
| The shank bevel gear must be re-set when the following components are replaced: |
| t
| Tapered-roller bearing for shank bevel gear |
| t
| Secondary shaft housing |
|
|
|
