Do Not Sell My Personal Information
skoda Workshop Repair Guides

Skoda Workshop Manuals

< PREV PAGE NEXT PAGE >
Removing and installing housing and lock cylinder
Removing and installing housing and lock cylinder
Removing:
   
–  Release caps -1-.
  S57-0178
–  Slightly pull out and hold the door handle -1-. Loosen screw -3- by about 3 turns.
  Note
If the screw is unscrewed too far the catch may separate from the bracket and fall inside the door.
–  Release locking screw → Chapter (Pos. 12). The lock cylinder housing is detached.
–  Pull out lock cylinder housing with cap -2- from bracket at right angles to the door.
Installing:
–  Installation is carried out in the reverse order.
  S57-0179

Body > Body Work > Front door, central locking > Front door > Removing and installing housing and lock cylinder

< PREV PAGE NEXT PAGE >