Octavia Mk2
Summary of components of door handle and door lock |
1 - | 5 Nm |
2 - | Clamp |
Removing: |
l | Door handle, housing or lock cylinder and assembly carrier have been removed. |
– | Remove screw (Pos. 1), push the clamp slightly back and remove from the door. |
Installing: |
– | Installation is carried out in the reverse order. |
3 - | Control cable |
q | Serves to release the lock |
4 - | Door lock |
q | Removing and installing → Chapter. |
5 - | Housing (front passenger door) |
q | Removing and installing → Chapter. |
6 - | Cap (front passenger door) |
7 - | Base |
8 - | Lock cylinder (driver's door) |
q | Removing and installing → Chapter. |
9 - | Cap (driver's door) |
10 - | Door handle with washer |
q | Removing and installing → Chapter. |
11 - | Screw |
q | Releasing this screw unlocks the catch of the housing (Pos. 5) or the lock cylinder (Pos. 8) and the housing (lock cylinder) can then be removed from the clamp (Pos. 2). |
12 - | 3 Nm |
q | Releasing this screw unlocks the housing (Pos. 5) or the lock cylinder (Pos. 8) and the housing (lock cylinder) can then be removed from the clamp (Pos. 2). |