Octavia Mk2
| Parts of cooling system on the side next to the body - Summary of components |
| 1 - | Top coolant hose |
| q | To connection fitting at cylinder head |
| 2 - | O-ring |
| q | replace if damaged |
| 3 - | Radiator |
| q | removing and installing → Chapter |
| q | after replacing fill entire system with fresh coolant |
| 4 - | Gasket |
| 5 - | Screw cap |
| q | Testing the pressure relief valve in the cap → Chapter |
| 6 - | Connector |
| 7 - | 3 Nm |
| 8 - | Expansion reservoir |
| q | with coolant shortage warning light sender - G32- |
| q | check the coolant system for tightness → Chapter |
| 9 - | Support |
| q | for radiator |
| 10 - | 7 Nm |
| 11 - | Spacer |
| q | for bracket of the refrigerant line |
| 12 - | Rubber bearing |
| q | 2 pieces |
| q | ïnserted in the lock carrier |
| 13 - | 5 Nm |
| 14 - | Fan shroud |
| q | removing and installing → Chapter |
| 15 - | 5 Nm |
| 16 - | Right radiator fan -V35- |
| q | Removing and installing fan shroud → Chapter |
| 17 - | Plug connection |
| 18 - | Connector |
| 19 - | Radiator fan -V7- |
| q | with radiator fan control unit -J293- |
| q | Removing and installing fan shroud → Chapter |
| 20 - | Bottom coolant hose |
| q | check tightness |
| q | connection diagram for coolant hoses → Chapter |
| 21 - | Retaining clip |
| q | only fitted on vehicles with air conditioning system |
| q | check tightness |
| 22 - | Thermoswitch or sender |
| Vehicles without air conditioning system: |
| q | Thermoswitch for radiator fan - F18- |
| q | Tightening torque: 2.5 Nm |
| Vehicles with air conditioning: |
| q | Coolant temperature sender at radiator outlet -G83- |
| 23 - | O-ring |
| q | replace |