Workshop Manuals Factory service & repair Skoda
01 Running gear02 Body03 Drive unit04 Power transmission05 Vehicle electrics06 Heating, ventilation, air conditioning system07 Power unit
Skoda Octavia Mk203 · Drive unit
03 · Engine

Cooling system

Make
Skoda
Model
Octavia Mk2
Section
1.6/85 kW FSI Engine › Engine cooling › Cooling system
Drive unitCooling system
Cooling system
Cooling system – Skoda Octavia Mk2   WARNING
Hot steam or hot coolant may escape when the compensation bottle is opened. Cover the cap with a cloth and open carefully.
Cooling system – Skoda Octavia Mk2  Note
t  When the engine is warm the cooling system is under pressure. If necessary reduce pressure before repairs.
t  The hose connections are secured with spring-type clips. In the event of repairs only use spring-type clips.
t  Use pliers for spring strap clips to fit the spring strap clips.
t  Always replace seals and gasket rings.
t  When installing fit the coolant hoses free of stress, without them touching any other components (pay attention to the marking on the coolant connection).
t  The arrows affixed to the coolant pipes and the coolant hoses must stand opposite to each other.
   

Parts & tools for this job For Skoda Octavia

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.