skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Engine cylinder head, valve gear > < Piston and conrod - Summary of components

Octavia Mk2

Separate new conrod
Separate new conrod
It can happen that the predetermined breaking point on the new conrod is not completely pierced. If the conrod bearing cap cannot be lifted by hand, proceed in the following manner:
–  Mark the mark assignment to cylinder of the conrod.
   
–  Slightly tension the conrod, as shown in the illustration, in a vice provided with aluminium protective jaws.
  Note
t  The conrod must only be slightly tensioned in order to avoid damage on the conrod.
t  The conrod is clamped below the broken line.
–  Screw out both screws -arrows- approximately 5 turns.
  N13-10285
–  Carefully knock with a plastic hammer in -direction of arrow - against the conrod bearing cap until it is loose.
  N13-10286

Engine cylinder head, valve gear > < Piston and conrod - Summary of components