Octavia Mk2
| Activated charcoal container system - Summary of components |
Note| t | The hose connections are secured with spring strap clips or clamp-type clips. |
| t | Always replace clamp-type clips with spring-type clips. |
| t | Use pliers for spring strap clips to fit the spring strap clips. |
| t | Safety precautions when working on the fuel supply system → Chapter. |
| t | Rules of cleanliness when working on the fuel supply system → Chapter. |
| 1 - | Activated charcoal filter |
| q | Fitting position: in right of engine compartment |
| q | if the catch peg is unlocked, the activated charcoal filter can be removed from the holder |
| q | Checking the fuel tank venting → Chapter |
| 2 - | Pressure holding valve with connection hose |
| 3 - | 8 Nm |
| 4 - | Connecting hose |
| q | check for firm seating |
| q | press in the securing ring for the separation. |
| 5 - | from fuel tank |
| 6 - | 8 Nm |
| 7 - | 5 Nm |
| 8 - | Support |
| q | for activated charcoal filter |
| 9 - | from exhaust turbocharger |
| 10 - | To intake manifold |
| 11 - | Double non-return valve |
| q | attached to intake manifold → Chapter |
| q | a component with activated charcoal filter solenoid valve 1 - N80- |
| 12 - | 12 Nm |
| 13 - | Solenoid valve 1 for activated charcoal filter -N80- |
| q | Valve closed when ignition is switched off |
| q | valve is actuated (pulsed) by engine control unit when engine is warm |
| q | a component with double non-return valve |
| 14 - | Connecting hose |
