skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Draining and filling up coolant (Octavia II) > < Engine with identification characters BKC, BXE
Engine with identification characters BLS
   
Engine with identification characters BLS
1 - Expansion reservoir
q   with cap
q   Testing the pressure relief valve in the cap → Chapter
2 - Radiator for exhaust gas recirculation
q   fill with fresh coolant after replacing → Chapter
q   removing and installing → Chapter
3 - Heat exchanger of heating system
q   fill with fresh coolant after replacing → Chapter
4 - ATF radiator
q   for models with an automatic gearbox
q   fill with fresh coolant after replacing → Chapter
5 - Cylinder head/cylinder block
q   fill with fresh coolant after replacing → Chapter
6 - Top coolant hose
7 - Oil cooler
q   fill with fresh coolant after replacing → Chapter
q   removing and installing → Chapter
8 - Radiator
q   removing and installing → Chapter
q   fill with fresh coolant after replacing → Chapter
9 - Bottom coolant hose
10 - Coolant pump/coolant regulator
q   removing and installing → Chapter
q   Removing and installing coolant regulator → Chapter
11 - Auxiliary heating
q   only for vehicles with auxiliary heating.

   

Draining and filling up coolant (Octavia II) > < Engine with identification characters BKC, BXE