Octavia Mk2
| Summary of components for engine with identification characters BJB |
| 1 - | 25 Nm |
| q | replace |
| q | Coat thread with hot bolt paste -G 052 112 A3- |
| 2 - | Connecting pipe |
| q | for exhaust gas recirculation |
| q | Pay attention to the part number |
| 3 - | Gasket |
| q | replace |
| 4 - | Support |
| q | for oil feed line |
| 5 - | to mechanical exhaust gas recirculation valve |
| 6 - | 10 Nm |
| 7 - | Oil feed line |
| q | Check oil feed line for continuity before installing. |
| q | Fill the exhaust turbocharger with engine oil through the connection fitting of the oil feed line before installing |
| 8 - | Union nut, 22 Nm |
| 9 - | Connection fittings, 30 Nm |
| 10 - | Sealing ring |
| q | replace |
| 11 - | Gasket |
| q | replace |
| q | Check fitting position |
| 12 - | Exhaust gas turbocharger |
| q | removing and installing → Chapter |
| 13 - | Support |
| q | between turbocharger and the cylinder block |
| 14 - | 40 Nm |
| q | tighten all bolts first of all by hand |
| 15 - | Oil return-flow line |
| q | in the cylinder block |
| q | Tighten union nut to 30 Nm |
| 16 - | Connection fittings, 40 Nm |
| 17 - | 17 Nm |
| 18 - | Nut, 8 Nm |
| 19 - | Screw, 8 Nm |
| 20 - | Vacuum setting element |
| q | for charge pressure control |
| q | check → Chapter |
| q | replacing and adjusting → Chapter |
| 21 - | 20 Nm |
| q | tighten all bolts first of all by hand |
| 22 - | Heat shield |
| 23 - | 22 Nm |
