Octavia Mk2
Summary of components for engine with identification characters BKC, BXE |
1 - | Gasket |
q | replace |
2 - | to changeover valve of radiator for exhaust gas recirculation |
3 - | 25 Nm |
q | replace |
q | Coat thread with hot bolt paste -G 052 112 A3- |
4 - | Connecting pipe |
q | for exhaust gas recirculation |
q | Pay attention to the part number |
5 - | Support |
q | for oil feed line |
6 - | 10 Nm |
7 - | Oil feed line |
q | Check oil feed line for continuity before installing. |
q | Fill the exhaust turbocharger with engine oil through the connection fitting of the oil feed line before installing |
8 - | Union nut, 22 Nm |
9 - | Connection fittings, 30 Nm |
10 - | Sealing ring |
q | replace |
11 - | Gasket |
q | replace |
q | Check fitting position |
12 - | Exhaust gas turbocharger |
q | can only be replaced complete with exhaust manifold and vacuum setting element of charge pressure control |
q | removing and installing → Chapter |
13 - | Support |
q | between turbocharger and the cylinder block |
14 - | 40 Nm |
q | tighten all bolts first of all by hand |
15 - | Oil return-flow line |
q | in the cylinder block |
q | Tighten union nut to 30 Nm |
16 - | Connection fittings, 40 Nm |
17 - | 17 Nm |
18 - | 20 Nm |
q | tighten all bolts first of all by hand |
19 - | Heat shield |
20 - | 22 Nm |