Octavia Mk2
Summary of components for engine with identification characters BLS |
1 - | 10 Nm |
2 - | Support |
3 - | Heat shield |
4 - | Oil feed line |
q | to connection fitting of oil feed line for exhaust turbocharger |
q | Check oil feed line for continuity before installing. |
q | Fill the exhaust turbocharger with engine oil through the connection fitting of the oil feed line before installing |
5 - | Screw, 8 Nm |
6 - | Vacuum setting element |
q | for charge pressure control |
q | check → Chapter |
q | replacing and adjusting → Chapter |
7 - | Nut, 8 Nm |
8 - | Vacuum hose |
9 - | Gasket |
q | replace |
q | Check fitting position |
10 - | for diesel particle filter |
11 - | Clamp, 7 Nm |
q | for exhaust gas turbocharger and diesel particle filter |
12 - | Exhaust gas turbocharger |
q | removing and installing → Chapter |
13 - | 25 Nm |
q | replace |
14 - | 25 Nm |
15 - | Gasket |
q | replace |
16 - | Connecting pipe |
q | for exhaust gas recirculation |
17 - | 25 Nm |
q | replace |
18 - | 15 Nm |
19 - | O-ring |
q | replace |
20 - | Hollow screw, 60 Nm |
21 - | Support |
q | for exhaust gas turbocharger |
q | for oil return-flow line |
22 - | Exhaust gas temperature sender 1 -G235- (Temperature sender upstream turbocharger -G507-) |
q | 45 Nm |
q | the thread of the new temperature sender must be coated with assembly paste |
q | coat only the thread with hot bolt paste -G 052 112 A3- for re-used temperature sender |
23 - | Heat shield |
24 - | Connection fittings |
q | for intake hose between air filter and exhaust turbocharger |
25 - | 9 Nm |
26 - | 10 Nm |