Octavia Mk2
Connection diagram for coolant hoses |
Vehicles without auxiliary heating. |
1 - | Expansion reservoir |
2 - | Exhaust gas return valve -N18- |
q | only for engine identification characters BLR, BLX, BVX, BVY |
3 - | Heat exchanger |
4 - | Gearbox oil cooler |
q | only on vehicles with automatic gearbox |
5 - | Engine oil cooler |
6 - | Throttle valve control unit -J338- |
q | only for engine identification characters BLR, BLX, BLY coolant-heated |
7 - | Intake manifold |
8 - | Radiator |
9 - | Coolant regulator housing |
q | Engine identification characters BLR, BLX, BLY: with thermostat for map-controlled engine cooling -F265- → Chapter |
q | Engine identification characters BVX, BVY, BVZ: with coolant regulator |
10 - | Coolant pump |
q | removing and installing → Chapter |
11 - | Cylinder head/cylinder block |
q | fill with fresh coolant after replacing |
Vehicles with auxiliary heating. |
1 - | Radiator |
2 - | Auxiliary heating |
3 - | Coolant regulator housing |
q | Engine identification characters BLR, BLX, BLY: with thermostat for map-controlled engine cooling -F265- → Chapter |
q | Engine identification characters BVX, BVY, BVZ: with coolant regulator |
4 - | Coolant pump |
5 - | Cylinder head/cylinder block |
6 - | Expansion reservoir |
7 - | Exhaust gas return valve -N18- |
q | only for engine identification characters BLR, BLX, BVX, BVY |
8 - | Non-return valve |
q | integrated into the coolant hose |
q | not always visible from the outside |
9 - | Heat exchanger |
10 - | Coolant shut-off valve of heating system -N279- |
11 - | Non-return valve |
q | integrated into the coolant hose |
q | not always visible from the outside |
12 - | Coolant hose |
q | only on vehicles with automatic gearbox |
13 - | Gearbox oil cooler |
q | only on vehicles with automatic gearbox |
14 - | Engine oil cooler |
15 - | Throttle valve control unit -J338- |
q | only for engine identification characters BLR, BLX, BLY coolant-heated |
16 - | Intake manifold |