Octavia Mk2
Coolant regulator housing with coolant regulator, engine identification characters BLR, BLX, BLY |
1 - | O-ring |
q | replace |
2 - | Coolant regulator housing |
q | with thermostat for map-controlled engine cooling -F265- |
q | removing and installing → Chapter |
3 - | O-ring |
q | replace |
4 - | Coolant pipe below |
q | removing and installing → Chapter |
5 - | 10 Nm |
6 - | 15 Nm |
7 - | Sealing ring |
q | replace |
8 - | Heating resistor |
q | Resistance at 25°C: 14..16 Ω |
9 - | Connector |
10 - | Thermostat for map-controlled engine cooling -F265- |
q | removing and installing → Chapter |
q | check → Chapter |
q | Start of opening approx. 105°C |
q | Opening stroke: 8 mm |