Octavia Mk2
| Balancing shaft module with oil pump - Summary of components, engine identification characters BLR, BLX, BLY, BVX, BVY, BVZ |
| 1 - | Chain cover |
| 2 - | Chain |
| q | mark running direction (installed position) with colour before removing |
| 3 - | Fitting sleeve |
| 4 - | Balancing shaft module |
| q | removing and installing → Chapter |
| q | before installing, check whether both dowel sleeves (Pos. 3) for centering are present |
| 5 - | 3 Nm |
| q | insert using locking agent |
| 6 - | Cover |
| q | prevents the foaming of engine oil |
| 7 - | Oil return fittings |
| q | with gasket |
| 8 - | 9 Nm |
| 9 - | Oil suction pipe |
| q | Clean strainer if dirty |
| 10 - | 8 Nm |
| 11 - | O-ring |
| q | replace |
| 12 - | 15 Nm + torque a further 90° (1/4 turn) |
| q | replace |
| q | pay attention to the different screw lengths → Chapter |
| 13 - | O-ring |
| q | replace |
| 14 - | Screw plug, 15 Nm + torque a further 90° (1/4 turn) |
| q | replace |
| 15 - | Fitting sleeve |
| 16 - | Outer rotor |
| q | Check contact surfaces for scoring |
| q | Marking must be visible |
| 17 - | Inner rotor |
| q | Check contact surfaces for scoring |
| 18 - | Oil pump cover |
| 19 - | Sprocket |
| q | for oil pump |
| 20 - | 20 Nm + torque a further 90° (1/4 turn) |
| q | replace |
| 21 - | Chain tensioner with tensioning rail |
| q | for installing, tension and lock → Chapter |
| 22 - | 15 Nm |
