skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Parts of the cooling system fitted to body for engine with engine identification characters BKD, AZV > < Testing oil pressure and oil pressure switch

Octavia Mk2

Removing and installing parts of the cooling system
Removing and installing parts of the cooling system
  WARNING
Hot steam or hot coolant may escape when the coolant expansion reservoir is opened. Cover the cap with a cloth and open carefully.
  Note
t  When the engine is warm the cooling system is under pressure. If necessary reduce pressure before repairs.
t  Secure all hose connections with corresponding hose clips.
t  Use pliers for spring strap clamps to fit the spring strap clips.
t  Always replace seals and gasket rings.
t  The arrows affixed to the coolant pipes and the coolant hoses must stand opposite to each other.
   

Parts of the cooling system fitted to body for engine with engine identification characters BKD, AZV > < Testing oil pressure and oil pressure switch