Octavia Mk2
Parts of the cooling system fitted to body for engine with engine identification characters BKD, AZV |
1 - | Radiator |
q | removing and installing → Chapter |
q | after replacing fill entire system with fresh coolant → Chapter |
2 - | O-ring |
q | replace if damaged |
3 - | Top coolant hose |
q | To connection fitting at cylinder head |
q | connection diagram for coolant hoses → Chapter |
4 - | Screw cap |
q | Test pressure 0.14...0.16 MPa (1.4...1.6 bar) |
q | check → Anchor |
5 - | Connector |
6 - | 3 Nm |
7 - | Coolant expansion reservoir |
8 - | Bottom coolant hose |
q | to connection fitting at coolant regulator at cylinder block |
q | connection diagram for coolant hoses → Chapter |
9 - | 5 Nm |
10 - | 5 Nm |
11 - | Right radiator fan -V35- |
q | removing and installing → Chapter |
12 - | Radiator fan -V7- |
q | with radiator fan control unit -J293- |
q | removing and installing → Chapter |
13 - | Connector |
14 - | Fan shroud |