Octavia Mk2
Parts of the cooling system fitted to engine for engine with engine identification characters BMM |
1 - | to top of coolant expansion reservoir |
q | connection diagram for coolant hoses → Chapter |
2 - | Top coolant pipe |
q | screwed onto the cylinder head cover |
3 - | O-ring |
q | replace |
4 - | Retaining clip |
q | check tightness |
5 - | Coolant temperature sender -G62- |
6 - | to radiator for exhaust gas recirculation |
q | connection diagram for coolant hoses → Chapter |
7 - | Connection fittings |
q | for cylinder head |
8 - | 10 Nm |
9 - | towards top radiator |
q | connection diagram for coolant hoses → Chapter |
10 - | from heat exchanger |
q | Coolant return-flow line |
q | connection diagram for coolant hoses → Chapter |
11 - | 40 Nm |
12 - | Distributor part |
13 - | from distributor part of top coolant hose |
q | connection diagram for coolant hoses → Chapter |
14 - | 15 Nm |
15 - | from bottom of coolant expansion reservoir |
q | connection diagram for coolant hoses → Chapter |
16 - | Coolant pipe |
17 - | Gasket ring |
q | replace |
18 - | Coolant temperature sender at radiator outlet -G83- |
19 - | 15 Nm |
20 - | to bottom radiator |
q | connection diagram for coolant hoses → Chapter |
21 - | Connection fittings |
q | with coolant regulator |
22 - | Coolant regulator |
q | removing and installing → Chapter |
q | check: heat up regulator in a water bath |
Start of opening approx. 87 °C |
Full opening: approx. 102 °C |
Stroke: minimum 7 mm |
23 - | The coolant pipes at the rear |
q | Vehicles with auxiliary heating. |
q | connection diagram for coolant hoses → Chapter |
24 - | from radiator for exhaust gas recirculation |
q | connection diagram for coolant hoses → Chapter |
25 - | to heat exchanger |
q | connection diagram for coolant hoses → Chapter |
26 - | Coolant pump |
q | check smooth operation |
q | Check fitting position |
q | removing and installing → Chapter |
27 - | Oil cooler |
q | removing and installing → Chapter |