skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing radiator for engine with engine identification characters BKD, AZV > < Draining coolant and filling up for engine with engine identification characters BKD, AZV

Octavia Mk2

Removing and installing fan shroud for radiator fanV7 and right radiator fanV35 for engine with engine identification characters BKD, AZV
Removing and installing fan shroud for radiator fan -V7- and right radiator fan -V35- for engine with engine identification characters BKD, AZV
Removing
–  Remove engine cover → Chapter.
–  Remove air filter with air intake hose from lock carrier → Chapter.
–  Remove noise insulation → Body Work → Rep. Gr.50.
   
–  Disconnect plug -2- at charge pressure sender -G31-/intake air temperature sender -G42-.
–  Release screw -4-.
–  Remove charge air pipe with connecting hose; to do so raise the retaining clips -1- and -3-.
  S34-0867
–  Disconnect plug connection -1-.
–  Screw out screws -arrows- and take out fan shroud downwards.
Install
Installation occurs in reverse order to removal. Pay attention to the following:
t  Tightening torques: → Chapter
  S34-0868

Removing and installing radiator for engine with engine identification characters BKD, AZV > < Draining coolant and filling up for engine with engine identification characters BKD, AZV