skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Plug connections on the control unit for ClimatronicJ255 > < Function of the Control and display unit for air conditioner/ClimatronicE87 with Climatronic control unitJ255 as of MY 09 (CW 45

Octavia Mk2

Removing and installing Control and display unit for air conditioner, ClimatronicE87 with Climatronic control unitJ255
Removing and installing Control and display unit for air conditioner, Climatronic -E87- with Climatronic control unit -J255-
  Note
t  The Climatronic control unit -J255- and the Control and display unit for air conditioner/Climatronic -E87- cannot be disassembled.
t  As of MY 09 (CW 45.08), different arrangement of actuating elements and displays, the assembly work is indentical.
Removing
–  Vehicles with mobile phone holder - slacken mobile phone holder → Electrical System → Rep. gr.91.
–  Carefully lever out the cover for the radio/navigation and the heater control using a disassembly wedge -3409-.
   
–  Unscrew the screws -2- and remove the control and display unit for air conditioner/Climatronic -E87--1- from the dash panel.
–  Disconnect the plug connections on the control and display unit for air conditioner/Climatronic -E87-.
Install
Installation is performed in the reverse order, pay attention to the following points:
  Note
t  Test the operation of the control and display unit for air conditioner/Climatronic -E87- after the installation.
t  Carry out „Initiate basic setting“ with the → Vehicle diagnostic tester.
t  If the push-button AC does no longer function after replacing the Climatronic control unit -J255-, carry out the function of the „AC compressor inlet“ with the → Vehicle diagnostic tester in the targeted fault finding.
  S87-0236

Plug connections on the control unit for ClimatronicJ255 > < Function of the Control and display unit for air conditioner/ClimatronicE87 with Climatronic control unitJ255 as of MY 09 (CW 45