Skoda Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Replace gasket ring for flange on the Haldex coupling on installed rear final drive >
< Removing the flange shaft gasket ring
Octavia Mk2
Power transmission
Gearbox 02E-DSG
Final drive, differential, differential lock
Replacing gasket rings for flange shafts at rear final drive (rear final drive installed)
Install gasket ring for flange shaft
Install gasket ring for flange shaft
Install gasket ring for flange shaft
–
Lightly oil new gasket ring at outside diameter and drive in with pressure plate -T10049- up to the stop, do not twist the gasket ring.
–
Fill half the space between the sealing lip and dust lip with sealing grease -G 052 128 A1-.
–
Clamp the flange shaft in a vice with protective jaws.
–
Push out the old circlip from the flange shaft groove with the new circlip
-A-
.
–
Drive in the flange shaft with a rubber hammer.
–
Install drive shaft
→ Chassis; Rep. gr.42
.
–
Checking the oil level in the rear final drive
→ Chapter
.
Power transmission
Gearbox 02E-DSG
Final drive, differential, differential lock
Replacing gasket rings for flange shafts at rear final drive (rear final drive installed)
Install gasket ring for flange shaft
Replace gasket ring for flange on the Haldex coupling on installed rear final drive >
< Removing the flange shaft gasket ring