t
| Bleeder -A- (slave cylinder is located in the clutch housing) |
Note t
| Symptoms of an external leak are, amongst others, traces of brake fluid below the gearbox or on the noise insulation under the gearbox. |
t
| Check the correct routing of the plastic line between the master and slave cylinder. The line must not be kinked or trapped. |
–
| Subsequently depress the clutch pedal carefully, at the same time hold the foot controls in five different positions for approx. 20 seconds over the entire distance the pedal has to travel. While doing so, a second person must check if fluid is leaking from the components of the hydraulic clutch control → Anchor. At the same time the first person must check if the clutch pedal falls through on its own while being held. |
|
|
|