skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Checking the gear oil level in the "rear final drive 0BR" > < Checking the gear oil level in the rear final drive

Octavia Mk2

Checking the gear oil level in the „rear final drive 02D/0AV“ (Octavia II)
Checking the gear oil level in the „rear final drive 02D/0AV“ (Octavia II)
Special tools and workshop equipment required
t  Filling device for Haldex coupling 2 -VAS 6291- or -VAS 6291A-
t  Catch pan
Oil specification → Electronic Catalogue of Original Parts.
l  Vehicle on level ground.
–  Place a catch pan under the rear final drive.
   
–  Release screw for oil inspection -arrow-.
Oil is at the correct level if the rear final drive is filled up to the lower edge of the oil filler hole.
–  Screw in oil check screw -arrow- and tighten to tightening torque.
If re-filling, do the following:
–  Release screw for oil inspection -arrow-.
–  Pour in axle oil up to lower edge of filler hole.
–  Screw in oil check screw -arrow- and tighten to tightening torque.
  S39-0319
Tightening torque
ComponentNm
Oil check screw M 1015
Oil check screw M 2040

   

Checking the gear oil level in the "rear final drive 0BR" > < Checking the gear oil level in the rear final drive