skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Top up rear final drive with oil > < Checking the gear oil level in the "rear final drive 02D/0AV" (Octavia II)

Octavia Mk2

Checking the gear oil level in the „rear final drive 0BR“
Checking the gear oil level in the „rear final drive 0BR“
  Note
t  The „Haldex coupling“ is located in the rear final drive.
t  The final drive and the „Haldex coupling“ have separate oil circulation systems.
   
Assign oil filler plug and oil drain plug
A - Filler screw (inspection plug) for high efficiency oil for Haldex coupling
B - Drain plug for high efficiency oil for Haldex coupling
1 - Filler screw for gearbox oil (inspection plug)
2 - Drain plug for gearbox oil
Special tools and workshop equipment required
t  Filling device for Haldex coupling 2 -VAS 6291- or -VAS 6291A-
t  Catch pan
Oil specification → Electronic Catalogue of Original Parts.
l  Vehicle on level ground.
–  Place a catch pan under the rear final drive.
  N39-10358
–  Unscrew gearbox oil inspection plug -1-.
  Note
Do not unscrew the screws -2- (oil drain plug for rear final drive), -A- (oil filler plug for Haldex coupling) and -B- (oil drain plug for Haldex coupling).
Oil is at the correct level if the rear final drive is filled up to the lower edge of the oil filler hole.
–  Screw in new gearbox oil inspection plug -1- and tighten to 15 Nm
If re-filling, do the following:
–  Unscrew gearbox oil inspection plug -1-.
–  Pour in gear oil up to lower edge of filler hole.
–  Screw in new gearbox oil inspection plug -1- and tighten to 15 Nm
  N39-10358

Top up rear final drive with oil > < Checking the gear oil level in the "rear final drive 02D/0AV" (Octavia II)