Setting overview

Make

Skoda

Model

Octavia Mk2

Section

Gearbox 02Q › Final drive, differential, differential lock › Setting overview

Power transmissionSetting overview

Setting overview

  Note

When working on the gearbox it is only necessary to re-set the output shaft gears 1 through 4, output shaft 5th/6th gear and reverse gear or differential gear if parts were replaced that directly affect the setting of the gearbox. To avoid unnecessary settings, refer to the following table:

		Set:
		Output shaft gears 1 through 4 → Chapter	Output shaft 5th/6th and reverse gear → Chapter	Differential gear → Chapter
Replaced part:	Gearbox housing	x	x	x
	Clutch housing	x	x	x
	Output shaft gears 1 through 4	x
	Output shaft 5th, 6th gear/reverse gear		x
	Differential gear housing			x
	Tapered-roller bearing for output shaft gears 1 through 4	x
	Tapered-roller bearing for output shaft 5th/6th and reverse gear		x
	Tapered-roller bearings for differential gears.			x

04 Transmission