skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Disassembling and assembling Haldex coupling > < Removing

Octavia Mk2

Install
Install
   
–  Lightly oil new gasket ring at outside diameter and drive in with pressure plate -T10049- up to the stop, do not twist the gasket ring.
–  Fill half the space between the sealing lip and dust lip with sealing grease -G 052 128 A1-.
–  Clamp the flange shaft in the vice with protective jaws.
  S39-0336
–  Push out the old circlip from the flange shaft groove with the new circlip -A-.
–  Drive in flange shaft with rubber hammer and/or using drift.
–  Install flange shaft on gearbox → Chassis; Rep. gr.42.
–  Checking the oil level in the rear final drive → Chapter.
  S39-0353

Disassembling and assembling Haldex coupling > < Removing