Octavia Mk2
Note
|
| 1 - | Shift cable |
| q | connect with cable lock Pos. 11 |
| q | Fitting position → Chapter |
| q | removing and installing → Chapter |
| q | adjust → Chapter |
| q | attach with cable strap to the selector cable → Fig. |
| q | as of 11.06 the attachment of the control cable in the shift housing is modified → Chapter |
| 2 - | Selector cable |
| q | connect with cable lock Pos. 10 |
| q | Fitting position → Chapter |
| q | removing and installing → Chapter |
| q | adjust → Chapter |
| q | attach with cable strap to the shift cable → Fig. |
| q | as of 11.06 the attachment of the control cable in the shift housing is modified → Chapter |
| 3 - | Circlips |
| q | always replace → Electronic Catalogue of Original Parts |
| q | as of 11.06 the lock washers are no longer available → Chapter |
| 4 - | Shift housing |
| 5 - | Locking clips |
| q | do not damage cables when removing |
| q | always replace → Electronic Catalogue of Original Parts |
| 6 - | 20 Nm |
| q | 3 pieces |
| q | for cable support |
| 7 - | Cable support |
| q | made out of plastic or metal |
| 8 - | Grommet |
| q | for mounting of cable support to gearbox |
| 9 - | Bush |
| 10 - | Cable lock |
| q | for selector cable at relay lever |
| q | after installing set shift mechanism → Chapter |
| q | do not interchange, cable locks for selector cable at relay lever and for shift cable at gearshift lever are different → Fig. |
| q | unlock → Anchor for setting the gearshift mechanism |
| q | as of 06.07 it is fitted together with plastic relay lever → Chapter |
| q | remove from plastic relay lever → Chapter |
| q | press onto plastic relay lever → Chapter |
| 11 - | Cable lock |
| q | for shift cable at gearbox shift lever |
| q | after installing set shift mechanism → Chapter |
| q | do not interchange, cable locks for selector cable at relay lever and for shift cable at gearshift lever are different → Fig. |
| q | unlock → Anchor for setting the gearshift mechanism |
| 12 - | Circlips |
| q | always replace → Electronic Catalogue of Original Parts |
| q | is not required for cable locks for selector cable at relay lever, if relay lever is made of plastic |
| 13 - | Lock washer |
| q | always replace → Electronic Catalogue of Original Parts |
| q | is not required, if the relay lever is made of plastic |
| 14 - | Bushings |
| q | is not required, if the relay lever is made of plastic |
| 15 - | Reversing lever |
| q | Fitting position → Fig. |
| q | after installing set shift mechanism → Chapter |
| q | as of 06.07 the reversing level is plastic |
| q | Removing and installing plastic relay lever together with cable lock → Chapter |
| q | if the relay lever is made of plastic, bushings Pos. 14 are not required |
| 16 - | Sliding shoe |
| 17 - | Gearshift lever |
| q | with balancing weight |
| q | insert in such a way that the interrupted spacing of the teeth matches the gearshift shaft → Fig. |
| q | Fitting position → Fig. |
| q | after installing set shift mechanism → Chapter |
| q | as of 06.06 the diameter of the fixing bolts is smaller → Fig. |
| 18 - | 23 Nm |
| q | always replace → Electronic Catalogue of Original Parts |
