| Removing and installing the cylinder head |
| Special tools and workshop equipment required |
| t
| Supporting device -T30099- |
| t
| Counterholder -T30004 (3415)- with bolts -T30004/1 (3415/1)- |
| t
| Pliers for spring strap clamps |
| t
| Catch pan, e.g. -V.A.G 1306- |
| t
| Sealant remover gasket stripper (bearing code GST, bearing article no. R 34402), manufacturer Retech s.r.o. |
| l
| Engine temperature should not exceed 35°, because the cylinder head could be twisted when slackening the screws. |
| l
| The pistons must not be in TDC. |
|
|
|
