skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Replace sealing flange on the gearbox side|Install > < Replace sealing flange on the gearbox side

Octavia Mk2

Removing
Removing
Precondition
l  Gearbox is removed.
–  Remove flywheel and take off intermediate plate.
–  Position engine on TDC for cylinder 1 → Chapter (do not remove the screw cap for the camshafts).
–  Removing the oil pan → Chapter.
   
–  Remove engine speed sender -G28--arrow-.
–  Unscrew the fixing screws of the sealing flange.
  Note
Sealing flange and rotor are pressed together with three M6 x 35 mm screws from the crankshaft.
  N13-10083
–  Screw three screws M6x35 into the threaded bores of the sealing flange -arrows-.
–  Screw the screws alternately (max 1/2 turn (180°) per screw) in the sealing flange and press the sealing flange together with the rotor from the crankshaft.
  N13-10082

Replace sealing flange on the gearbox side|Install > < Replace sealing flange on the gearbox side