| –
| Carefully release catch pegs -arrows- and pull off restoring ring with coil spring -1- from the switch mounting on the steering column. |
| Installation is performed in the reverse order, pay attention to the following points: |
Note | t
| Vehicles manufactured as of 6.06 have no locking pin, which could lock the restoring ring against unintentional turning after removing the steering wheel. If there is a doubt about the correct positioning of the ring rotor, the middle position must be set → Chapter before installing the steering wheel. |
| t
| When installing, the restoring ring with coil spring must be in the middle position and the wheels in the straightahead position. |
|
|
|
