skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Removing and installing lever key of switch mounting on the steering column > < Removing and installing restoring ring with coil springF350
Removing and installing steering angle senderG85
Removing and installing steering angle sender -G85-
  Note
t  After replacing the steering angle sender -G85- subsequently the basic setting must be carried out with → Vehicle diagnostic tester
t  Right-hand drive as of 22.08 and left-hand drive as of 22.09 - steering angle sender -G85- integrated in the steering gear.
Removing
–  Remove restoring ring with coil spring -F350- → Chapter.
   
–  Detach steering angle sender -G85--1- in -direction of arrow-.
Install
Installation is carried out in the reverse order.
  N94-10049

Removing and installing lever key of switch mounting on the steering column > < Removing and installing restoring ring with coil springF350