Wiring loom and plug repair

Make

Skoda

Model

Octavia Mk2

Section

Electrical System - general notes › Wiring › Wiring loom and plug repair

Vehicle electricsWiring loom and plug repair

Wiring loom and plug repair Special tools and workshop equipment required t  Release tool set -S506815V- t  Release tool set -S506825V- t  Car tool kit for wiring loom repairs -S504500V- or: t  Car tool kit for wiring loom repairs -VAS 1978B- The car tool kit includes necessary tools (except the release tool set) as well as consumables. The car tool kit ensures optimal repair quality of the vehicle electrics. Repairs of plug connections and line interruptions can be carried out with the tools. For this purpose, complete repair cables with pre-crimped contacts are used and connected to the vehicle's own wiring loom by means of crimp connectors. The repair cables can be ordered → Electronic Catalogue of Original Parts. A stop plier with three different crimp recesses and a hot-air blower for shrinking the crimp connectors ensure a proper electrical connection. In case of re-ordering, only use the order number of the spare part, which is given on the checklist enclosed with the operating instructions. The release tool set is used to release different primary and secondary locks at the contact plugs. For example, round plug connector systems, flat contacts with one or two catches as well as single cable seals can be professionally released or mounted using the release tool set.   Note t  Further information and how to use the set → Operating instructions of the car tool kit. t  Refer to the table in the → Operating instructions of the release tool set in order to allocate the correct release tools.

05 General