Octavia Mk2
| Wheel with steel rim 6J x 15 or 6,5J x 16 |
Note| t | If the steel rim has to be fixed with an anti-theft wheel bolt, then this wheel bolt must be installed in the hole directly next to the valve The wheel trim cap must then be attached starting at the valve. |
| t | Because of design variations the steel rim and wheel trim cap may differ from the figure. |
| t | The contact surface tread may differ from the shown contact surface tread. |
| 1 - | Tyres |
| 2 - | Steel rim |
| q | 6J x 15, ET 47 |
| 3 - | Wheel bolt, anti-theft 120 Nm |
| q | M14 x 1.5 x 27.5 |
| 4 - | Adapter for anti-theft wheel bolt |
| q | included in tool kit |
| q | Master set for wheel bolts -T40004- or -T10101- |
| 5 - | Wheel screw, 120 Nm |
| 6 - | Balancing weights |
| q | max. 60 g allowed per rim flange |
| 7 - | Retaining spring for balancing weights |
| 8 - | Valve |
| q | only use valve in accordance with → Electronic catalogue of original parts |
| 9 - | Pull-off hook |
| q | included in tool kit |
| 10 - | Wheel bolt key |
| q | included in tool kit |
| 11 - | Remove wheel trim cap |
| q | different version → electronic catalogue of original parts |
| q | pull off with pull-off hook - Pos. 9 |
| 12 - | Steel rim |
| q | 6.5J x 16, ET 50 |
