| Wheels, Tyres - Instructions |
| Permissible wheel-tyre combinations → Chapter |
| For tyre assemblies your mounting device must be equipped with a tyre assembly head provided for these disc wheels. |
WARNING | Otherwise there is a risk of damage to the disc wheel. |
|
| If your tyre assembly device is not yet retrofitted, please contact the manufacturer for this device. |
| For safety reasons never change tyres individually but at least in axle pairs. |
| Tyres with the greatest tread depth must always be fitted at the rear. |
| It is recommended to fit tyres of the same make, same type and tread pattern on all wheels. |
| When replacing the disc wheel or the tyre always replace the rubber valve. |
| Mount the tyre with the DOT marking pointing towards the outside of the wheel. This applies only to the left side of the vehicle for directional tyres. |
| For directional tyres mount a wheel/tyre combination for the right side of the vehicle as spare wheel. |
WARNING | Only use those tyres or disc wheels on your vehicle which have been approved by Škoda Auto. |
| This information is dependant on the corresponding national legislation and standards. |
|
|
|
|
