Superb
| Assembly overview of the vane pump |
| 1 - | Compact holder |
| 2 - | Allan screw, 20 Nm |
| q | Securing the vane pump to the compact holder |
| 3 - | Gasket rings |
| q | diameter 16 x 22 |
| q | replace after each removal |
| 4 - | Hollow screw, 50 Nm |
| 5 - | Pressure line with hose |
| 6 - | Inlet hose |
| 7 - | Warm-type clamp |
| q | tighten, for example, using pliers -V.A.G 1275- |
| q | replace after each removal |
| 8 - | Vane pump |
| q | removing → Chapter |
| q | installing → Chapter |
| q | Check feed pressure → Chapter |
| 9 - | Belt pulley |
| q | When loosening and tightening, counterhold with the wrench for the water pump and power-assisted steering -MP1-308-. |
| 10 - | Allan screw, 25 Nm |
| q | replace after each removal |
| 11 - | V-ribbed belt |
| 12 - | Allan screw, 20 Nm |
