Superb
Parts of the cooling system fitted to body |
1 - | Radiator |
q | with an ATF radiator for vehicles with an automatic gearbox |
q | Remove and installing ATF lines → Automatic gearbox 01V; Rep. Gr.37. |
q | Cleaning ATF lines and radiator → Automatic gearbox 01V; Rep. Gr.37. |
q | removing and installing → Chapter |
q | after replacing fill entire system with fresh coolant |
2 - | Retaining pin |
3 - | Mounting rubber |
4 - | Connection for ATF line |
q | only on vehicles with automatic gearbox |
5 - | Top coolant hose |
q | attached to radiator with retaining clip |
q | check for firm seating |
q | connection diagram for coolant hoses → Chapter |
6 - | Fan for the coolant - V7- |
7 - | The fan ring |
q | is clipped into the air channel hood and secured in place using a securing screw → Item |
8 - | Securing screw |
9 - | 10 Nm |
10 - | 2-pin plug connection |
11 - | Rubber bearing |
12 - | Thermal switch for the fan for coolant -F18- |
q | for electric fan |
q | switching temperatures: |
1st Stage on: 92...97 °C |
1st stage off: 84...91 °C |
2nd Stage on: 99...105 °C |
2nd stage off: 91...98 °C |
q | secured using a retaining clip |
13 - | Connector |
q | black, 4 pin |
q | for the thermal switch for the fan for coolant |
14 - | Sealing strips |
q | inserted above and below on the radiator |
15 - | O-ring |
q | replace if damaged |
16 - | Screw plug, 10 Nm |
17 - | Bottom coolant hose |
q | with a holding clamp on the radiator and secured on the connection fitting |
q | check for firm seating |
q | connection diagram for coolant hoses → Chapter |
18 - | Drain plug, 10 Nm |