Skoda Workshop Service and Repair Manuals

Removing and installing pre-exhaust pipe with main catalytic converter Removing –  Remove front left wheel.   Note Secure brake disc with wheel screws. –  Remove the sound dampening system → Body Work; Rep. Gr.50.

–  Unscrew screw -2- of the noise cover above the left drive shaft. –  Unhook hook -1- and remove noise cover.

–  Remove protective cover -1- of left drive shaft. –  Remove front tunnel bridge.

–  Unscrew pre-exhaust pipe of pre-catalytic converter -1-.

Vehicles fitted with a manual gearbox –  Unscrew nut -arrow- on the hanger at the pre-exhaust pipe.

Vehicles with automatic gearbox –  Unscrew the holder of the hanger at the pre-exhaust pipe -arrow-. Continued for all vehicles

–  Slacken nuts of double clamp -arrows-. –  Push double clamp to the rear. –  Remove exhaust pipe with main catalytic converter. Install Installation is performed in the reverse order, pay attention to the following points:   Note The original double clamp must be replaced.