Superb
| 5. and removing/installing 6th gear |
| 1 - | Inner ring for four-point bearing |
| q | Ball bearing side |
| q | xtracting and inserting → Chapter |
| 2 - | Needle bearing |
| q | for 5th gear |
| 3 - | Inner ring for needle bearing |
| q | for 5th gear sliding gear |
| q | xtracting and inserting → Chapter |
| 4 - | 5th gear sliding gear |
| q | extracting and installing → Chapter |
| 5 - | Sliding sleeve/synchronizer body for 5th and 6th gear |
| q | removing and installing → Chapter |
| 6 - | 6th gear sliding gear |
| q | remove together with 5th gear synchronizer body and inner ring → Chapter |
| 7 - | Needle bearing |
| q | for 6th gear |
| 8 - | Thrust washer |
| q | for needle bearing for 6th gear sliding gear |
| q | Fitting position: Recess for circlip, smooth thrust surface for needle bearing |
| 9 - | Circlip |
| 10 - | Inner ring |
| q | for cylindrical-roller bearing |
| q | remove manually → Chapter |
| 11 - | Drive shaft |
| 12 - | Selector rod for 5th and 6th gear |
| q | only replace complete with driver for 5th and 6th gear Pos. 13 |
| q | removing and installing → Chapter |
| 13 - | Driver for 5th and 6th gear |
| q | only replace complete with shift rod for 5th and 6th gear Pos. 12 |
| q | remove → Chapter |
| 14 - | Tensioning pin |
| q | removing and inserting → Chapter |
| 15 - | shift fork for 5th and 6th gear |
| q | can be replaced separately |
| 16 - | Circlip |
| 17 - | 5th gear pinion |
| q | xtracting and inserting → Chapter |
| 18 - | Circlip |
| q | Determining thickness again → Chapter |
| 19 - | 6th gear pinion |
| q | remove bearing shield to extract → Chapter |
| q | pressing off and on → Chapter |
| 20 - | Secondary shaft |
