Vehicle electricsRear lights
| Removing and installing rear light |
| –
| Switch off all electrical components and take out the ignition key. |
|
|
|
| –
| Swing the cover in front of the tail light in the luggage compartment to one side and disconnect the plug connector -1-. |
| –
| Unscrew the securing nuts -arrows- and remove the tailgate light housing towards the rear. |
Note | When installing ensure that the seal between the body and the rear lamp housing provides a proper seal. |
| –
| Installation is carried out in the reverse order. |
| –
| Before tightening the nuts, match up the rear light to the bodywork (uniform gap size all round). |
|
|
|
07 General
