Connect brake lines to the ABS hydraulic unit |
A - | from master brake cylinder (push rod piston circuit) to ABS hydraulic unit |
- | Distinguishing feature: Ø 6,5 mm and pipe screw with thread M 12 × 1 |
B - | from master brake cylinder (floating piston circuit) to ABS hydraulic unit |
- | Distinguishing feature: Ø 6,5 mm and pipe screw with thread M 12 × 1 |
1 - | from hydraulic unit to front left brake caliper |
- | Distinguishing feature: Ø 5.25 mm and pipe screw with short thread M10 x 1 |
2 - | from the hydraulic unit to the rear left brake caliper |
- | Distinguishing feature: Ø 5,25 mm and pipe screw with thread M 12 × 1 |
3 - | from the hydraulic unit to the rear right brake caliper |
- | Distinguishing feature: Ø 5,25 mm and pipe screw with thread M 10 × 1 |
4 - | from the hydraulic unit to the front right brake caliper |
- | Hydraulic unit to front right brake caliper |
- | Distinguishing feature: Ø 5.25 mm and pipe screw with short thread M12 x 1 |
|
|
|