skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Differential gear > < Disassembling and assembling the reverse shaft

Yeti

Removing
Removing
–  Remove front left wheel → Chassis; Rep. gr.44 and raise vehicle.
–  Remove the sound dampening system → Body Work; Rep. gr.50.
–  Remove the front left wheelhouse liner → Body Work; Rep. gr.66.
–  Turn steering to full left lock.
–  Unscrew drive shaft from flange shaft → Chassis; Rep. gr.40.
–  Tie up the drive shaft as far as possible. Avoid damaging the paintwork on the drive shaft during this operation.
–  Position the catch pan under the gearbox.
   
–  Unscrew the fixing screw for the flange shaft, to this end insert two screws in the flange and using a tyre iron hold the shaft.
–  Remove the flange shaft with pressure spring.
  S34-1015
–  Pull out seal ring for flange shaft with Multi-purpose tool -MP3-419 (VW 771)-.
  S39-0285

Differential gear > < Disassembling and assembling the reverse shaft