skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing radiator > < Radiator with two radiator fans - Summary of components

Yeti

Removing and installing fan shroud for radiator fan
Removing and installing fan shroud for radiator fan
(Octavia II, Yeti)
  Note
The removal and installation of the fan shroud with two radiator fans is similar to the removal and installation with one radiator fan.
Removing
–  Remove air filter → Chapter.
   
–  Unscrew the top fixing screws of the fan shroud -arrows-.
–  Remove the sound dampening system → Body Work; Rep. gr.50.
–  Disconnect the plug connection -1- and unscrew the bottom fixing screws of the fan shroud -arrows-.
–  Remove fan shroud downwards.
Install
Installation is performed in the reverse order, pay attention to the following points:
Tightening torques:
  N19-10373
ComponentNm
Fan shroud at radiator5

   

Removing and installing radiator > < Radiator with two radiator fans - Summary of components